Trailering

C.E. Smith Bolt-On Fender Step Pad - 3" Left Hand/Right Hand [26212GA]

Bolt-On Fender Step Pad - 3" Left Hand/Right HandThis fender step pad is ideal for the do-it-yourselfer. Step pad can be welded or bolted to your trailer fender. Step pad can also be bolted to your trailer frame with u-bolts. U-bolts NOT included...

C.E. Smith Grease Seals f/1" - 1-1/16" Straight Spindle [16303A]

Grease Seals f/1" to 1-1/16" Straight SpindleProduct DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and...

C.E. Smith Dust Caps - Hub ID 1.980" - (Pair) [16200A]

CE Smith Dust Caps - Hub ID 1.980" - (Pair)Product DescriptionUse this dust cap to protect your axle nut.Features:Fits hub with inner diamerter of 1.98"Sold in pairsWARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are...

C.E. Smith 4" Adjustable Keel Roller Assembly f/2" Tongue - Black [32005G]

4" Adjustable Keel Roller Assembly f/2" Tongue - BlackProduct DescriptionAdjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Features:Fits 2" tongue width4" black rubber rollerIncludes pair of 3/8"...

C.E. Smith 5" Adjustable Keel Roller Assembly f/3" Tongue - Black [32003G]

5" Adjustable Keel Roller Assembly f/3" Tongue - BlackProduct DescriptionAdjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Features:Fits 3" tongue width5" black rubber rollerIncludes pair of 3/8"...

C.E. Smith 3" Stationary Keel Roller Assembly f/3" Tongue [32150G]

3" Stationary Keel Roller Assembly f/3" TongueProduct DescriptionStationary keel roller bracket assembly for a 3" wide tongueBracket1/8" thick Galvanized5/8" shaft1/2" hole slots3" hole centersReplacement part #32151GRollerBlack natural rubber3"...

C.E. Smith 2" Stationary Keel Roller Assembly f/2" Tongue [32110G]

2" Stationary Keel Roller Assembly f/2" TongueProduct DescriptionStationary keel roller bracket assembly for a 2" wide tongueBracket1/8" thick Galvanized 5/8" shaft1/2" hole 2-1/2" hole centersReplacement part #32111GRoller3" diameter3-7/8" wide5/8"...

C.E. Smith 1-1/2" Wide Keel Base Roller Assembly f/2" - 2-1/2" Tongue [32100G]

1-1/2" Wide Keel Base Roller Assembly f/2" - 2-1/2" TongueProduct DescriptionThis roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4", black rubber spool roller and a galvanized steel bracket...

C.E. Smith 4" Bow Bell Roller Assembly - Yellow TPR [29301]

4" Bow Bell Roller Assembly - Yellow TPRProduct DescriptionDurable Thermal Plasticized Rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Yellow TPR5-1/2" Diameter8" wide1/2" shaftFits 4" wide center roller...

C.E. Smith 5' Bunk Board Guide-On [27600]

5' Bunk Board Guide-OnProduct DescriptionCarpeted bunkboards provide proper center loading even in wind or side current conditions.1-1/2" square pre-galvanized uprights, angled out at 75°2" x 4" x 60" boards tilt to hug the hull and are covered...

C.E. Smith 75" Post Guide-On w/Unlighted Posts f/U-Bolt Mounting [27636]

75" Post Guide-On w/Unlighted Posts f/U-Bolt MountingProduct DescriptionThese Post Guide-Ons allow you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp...

C.E. Smith 60" Post Guide-On With I-Beam Mounting Kit [27648]

60" Post Guide-On With I-Beam Mounting KitProduct DescriptionThese Post Guide-Ons allow you to see the location of your trailer when it's under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece...