Rigging

Barton Marine Genoa Car - Fits 25mm (1") T Track [25100]

Genoa Car - Fits 25mm (1") T TrackFeatures a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knobA popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T'...

Barton Marine Genoa Car - Fits 32mm (1-1/4") T Track [32100]

Genoa Car - Fits 32mm (1-1/4") T TrackFeature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is...

Barton Marine Small Furling Drum - 2.99" [42334]

Small Furling Drum - 2.99"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 4.3M of LineSpecifications:Drum Diameter:...

Barton Marine Furling Drum - 3.74" [42335]

Furling Drum - 3.74"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 8.5M of LineSpecifications:Drum Diameter: 95mmSail...

Barton Marine Size 5 Vang Tackle 4:1 [05900]

Size 5 Vang Tackle 4:1Upgrade your existing Vang system or use it as a boom preventer.  Snap shackle fixings allow for quick and easy deployment.  Professionally spliced and assembled. Compatible With:Boats up to 35' (10.7 M)Technical...

Barton Marine Genoa Slide w/Loop f/32mm Track [32301]

Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4")...

Taylor Made Tidy-Ups Boat Dock Line Holder - Standard Rails [1101]

Tidy-Ups Boat Dock Line Holder - Standard RailsFeatures:Rail mount UV resistant vinyl strap securely holds rope, cords, etc. Fits 1" - 1-1/4" RailsNot sold in pairsWARNING: This product can expose you to chemicals including...

C. Sherman Johnson Pulpit Anchor f/1" Rail [29-501]

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminated jaw fittings for lower or upper life lines. (1/2" hole). Hole will not accept cast gate hooks. 

C. Sherman Johnson Eye to Deck Toggle Fitting [LS-2550]

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

C. Sherman Johnson "T" Style Toggle Jaw f/1/8" Wire [26-415]

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

C. Sherman Johnson "T" Style Deck Toggle f/1/8" Wire [26-415-1T]

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

C. Sherman Johnson Snap Gate Hook - Body Only - 5/16" - 24 Right Hand [21-80-1]

Snap Gate Hook - Body Only - 5/16" - 24 Right HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 RH